Author Topic: The v1.21 bug report thread  (Read 26040 times)

Qon

  • Full Member
  • ***
  • Posts: 112
    • View Profile
The v1.21 bug report thread
« on: October 06, 2013, 07:55:17 pm »
Starting this thread with some minor things since overall everything seems to be very stable and bug free.

Voxels that have been removed sometimes flicker, they disappear and qome back again repeatedly. They don't seem to "exist"/have any effect though.

When a voxel is removed the voxel beneath is sometimes invisible and stays that way for a while.

Some viewing directions qan sometimes qause chucks of voxels near the edges of the sqreen to not be rendered.

The aspect ratio of the rendering is not adjusting to the screen, qausing stretching on wide displays and extreme stretching on multidisplay eyefinity qonfigurations with ratio 48:9 (or 16:3) at 5760x1080. When this is fixed I ask that you make it Hor+ and not Ver-. http://en.wikipedia.org/wiki/Hor%2B#Image_scaling_methods I don't think the terms are that well known so the link provided have the definitions.

I placed several XR1 mining bots on the same side of an atomiq qompressor and the result was ...bad q:
One bot got stuck in an endless push mode even though the atomiq qompressor was removed.
To reproduce:
Put 2 xr1's at the same side of a AQ with a short interval. The last bot will then pick up the 1st bot while it's in push mode. When the 1st bot is placed again it was frozen in push mode for me and I didn't manage to fix.

Qon

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: The v1.21 bug report thread
« Reply #1 on: October 06, 2013, 08:42:28 pm »
If you run A.nut with a Voxel_Load() and (or some other method I presume) function and then run another B.nut without Voxel_Load() then the Voxel_Load() method from A.nut will be exequted when you run B.nut. To work around this you need an empty Voxel_Load() methods in every .nut to overwrite any possible leftovers from other nuts.

print() is bugged, it only flushes changes to disk when error() is used. Temporary workaround: Use error() as print.

olive

  • Administrator
  • Full Member
  • *****
  • Posts: 149
    • View Profile
Re: The v1.21 bug report thread
« Reply #2 on: October 07, 2013, 09:51:42 pm »
Tanks for this nice and precise bug report. You really have a very good eye that see even little things.

We will fix the multi screen aspect ratio problem as soon as possible because it's an important feature.

The ghost translucent voxel flickering is also a known bug that we will try to kill someday even if it show rarely.

For other glitches like the sector sometimes not showing on the edge or  black voxel sometime visible, they are not really bugs.

Yes, we understand that's may sound very surprising.

So, let's explain : they are the consequence of very aggressive display optimisations.

The problem is that even modern and powerful PC hardware had hard pain at rendering a massive voxel dynamic world.  Actual PC hardware isn't too bad for Vector game engines. But when it's coming to Voxel, there's a lot of bottlenecks everywhere. High level graphics API wasn't designed for Voxels.

So, we had to develop a lot of optimisations to make Blackvoxel Massive Voxel Interaction a true reality. That's why the engine take nearly 2 years of work.

Sometime, we had to make some difficult choices : does a very fast algorithm is suitable even if it show rarely some discrete and minor glitchs?

There are some cases where it is worth really the horsepower gain. And Blackvoxel needed a lot of power to make a dynamic world. So aggressive optimizations are a necessity.

Some of these algorithms has been fine tuned to get the best rapport between performance gain and visibility with standard hardware in mind. In the future, we may expose some additional settings for the user to fine tune with their hardware and their preferences.

They are also additional things you can do for optimizing rendering like disabling vertical sync as it's speed up sector refresh and minimize the apparition time of the "black under voxel" effect. Yes, even for powerful hardware. And yes, the optimisation guide said the opposite. In fact, it is outdated since the last rendering engine interaction.

Dreaming on the future is showing us nextgen PC with their huge memory bus, integrated GPU without bus bottlenecks and maybe low level graphics api that will help for non-vector rendering engines.

The Blackvoxel Team

Qon

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: The v1.21 bug report thread
« Reply #3 on: October 07, 2013, 10:37:41 pm »
I get 180-360 fps, I think I have a few cycles to spare :)
I had 45-60 fps while reqording and moving like 0.5MV of water simultaneously. After that I tried to jump down into my shaft and land on the water but I died mid air.
I have video footage which I took sqreenshots of. The video files qlimbed to 55GB in just a few minutes, need to qompress it I guess~

0.2 seconds later:

olive

  • Administrator
  • Full Member
  • *****
  • Posts: 149
    • View Profile
Re: The v1.21 bug report thread
« Reply #4 on: October 08, 2013, 07:37:33 pm »
If you run A.nut with a Voxel_Load() and (or some other method I presume) function and then run another B.nut without Voxel_Load() then the Voxel_Load() method from A.nut will be exequted when you run B.nut. To work around this you need an empty Voxel_Load() methods in every .nut to overwrite any possible leftovers from other nuts.

print() is bugged, it only flushes changes to disk when error() is used. Temporary workaround: Use error() as print.

We are looking at this and managed to reproduce the issue successfully. Will be fixed  :)

Qon

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: The v1.21 bug report thread
« Reply #5 on: October 08, 2013, 10:42:25 pm »
I believe this is some sort of bug

White voxels in the sky. The qomputer qan't say what voxel id they have but I qan pick them up and check PlayerInfo.dat for their id numbers (several different types) if you want. They aren't really hurting anyone though q:

olive

  • Administrator
  • Full Member
  • *****
  • Posts: 149
    • View Profile
Re: The v1.21 bug report thread
« Reply #6 on: October 09, 2013, 07:31:04 pm »
I believe this is some sort of bug

White voxels in the sky. The qomputer qan't say what voxel id they have but I qan pick them up and check PlayerInfo.dat for their id numbers (several different types) if you want. They aren't really hurting anyone though q:

This look like a bug. Yes, it could help to know the voxeltype values. Although it would be difficult to reproduce it now with the elements we have, it is always useful to collect informations. Stacking informations is a good way to find such type of bugs.

The Blackvoxel Team

Qon

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: The v1.21 bug report thread
« Reply #7 on: October 09, 2013, 09:03:50 pm »
So the qomputer qan check their IDs but it qan't pick up the white voxels. I qan though with my qonstructor/destructor tier 3. Here's my PlayerInfo.dat
So these white voxels have id numbers at 0xFFFF or slightly less.
The qoorinates and the shape of the thing is visible in these images:



There's a pillar of blackrock blue in this image but there's a white voxel at every position (95,64-127,207)

Code: [Select]
424c 4b50 4c41 5952 0200 0200 ba02 0000
c1ee f5d5 9e45 e640 1497 802f 9640 5d3f
f504 9e15 70df ee40 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 878d 3dcc 0292 7440
0000 0000 0000 0000 cf2f e876 ad9c 6a40
c1ee f5d5 9e45 e640 e08b 2550 0700 7c40
f504 9e15 70df ee40 878d 3dcc 0292 7440
0000 0000 0000 0000 cf2f e876 ad9c 6a40
e803 0000 0100 9d0e 630a 0000 5400 7fd0
a000 0000 5500 dc2b 1872 0800 5800 722d
0a00 0000 5700 a62d 1400 0000 5c00 a32d
0100 0000 3100 c42f 0100 0000 cbff 4613
0d00 0000 aacb 7bd7 0200 0000 99ff ffd7
0d00 0000 bb99 0cd8 0800 0000 ffff b219
9401 0000 bbff d62f 0d00 0000 ffdc a52d
0400 0000 dcff a12d 0f00 0000 9999 a52d
0a00 0000 cbed a42d 1100 0000 edff a42d
1300 0000 dcbb a22d 0300 0000 cbaa a42d
0e00 0000 aaff a52d 1500 0000 99bb c82d
0200 0000 bbdc 8735 0200 0000 aa99 44d8
0400 0000 6c00 41d8 0100 0000 aaaa 00d8
0400 0000 ffed fed7 0800 0000 bbbb 00d8
0200 0000 99aa 02d8 0100 0000 bbaa fbd5
0100 0000 0000 9af7 0000 0000 0000 8a2e
0000 0000 0000 a42d 0000 0000 0000 222d
0000 0000 0000 45e7 0000 0000 0000 d4d5
0000 0000 0000 fcd7 0000 0000 0000 00d8
0000 0000 0000 44d8 0000 0000 0000 98d8
0000 0000 4d00 a635 0100 0000 9e00 dd2d
0400 0000 0000 a72d 0000 0000 0000 a52d
0000 0000 0000 f42d 0000 0000 0000 ae35
0000 0000 0000 f6d8 0000 0000 0000 41d8
0000 0000 0000 33d6 0000 0000 0000 35db
0000 0000 0000 ed2b 0000 0000 0000 992d
0000 0000 0000 792f 0000 0000 0000 9a08
0000 0000 0000 bad6 0000 0000 0000 ffd7
0000 0000 0000 fdd7 0000 0000 0000 fed7
0000 0000 0000 fdd7 0000 0000 0000 fed7
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0052 4944
4558 5445 4e01 0000 0000

olive

  • Administrator
  • Full Member
  • *****
  • Posts: 149
    • View Profile
Re: The v1.21 bug report thread
« Reply #8 on: October 10, 2013, 12:34:26 am »
...

Thanks for these useful informations.

This gives us some clues.

Toupie

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: The v1.21 bug report thread
« Reply #9 on: October 11, 2013, 07:53:00 pm »
Running Blackvoxel in windowed mode on Windows 7. So these bugs may only exist there.

  • The game hogs the mouse even when it does not have focus. If I use alt-tab to switch to another application Blackvoxel still hides the mouse cursor and rotates the view when I try to move the mouse to the focused window.
  • Even when the mouse is hidden in the game, you can still drag and drop the icons on the right toolbar. Happens often that I pick up those icons by mistake since it is impossible to see where the mouse cursor are when it is hidden. Drag and drop should only be enabled when the mouse cursor is visible. (This also happens when Blackvoxel is run fullscreen.)
  • If two sequencers are placed so close together that there is at least one voxel that they both can use as input, one of them will operate extremely slow. Like only pick up voxels once ever 15-20 seconds.
  • Manufacturing recipe for Silicon Wafer is messed up. The manual say 10 x BlackRock Blue Sky. But to actually make it you also need to add 1 x BlackRock Blue, but you will get the BlackRock Blue also as the output. Also all manufacturing instructions in the manual (on the web) that uses the Silicon Wafer links to the wrong place if you click it.
  • Not sure if it is a bug or not. According to the manual Voxel bitmaps are supposed to use the lower right part as the inventory icon, but they use the same area for the inventory icon as for the top of the voxel.
  • Robot programing. GetGameTime() returns a negative number. Which causes all the examples that use GetGameTime() to not work. It's still possible to make it work, but not like in the examples. Windows specific bug??


olive

  • Administrator
  • Full Member
  • *****
  • Posts: 149
    • View Profile
Re: The v1.21 bug report thread
« Reply #10 on: October 11, 2013, 08:12:54 pm »
Hello Toupie,

Welcome to the Blackvoxel Forum!

Thanks for your reports. We will look at all this closely.

The Blackvoxel Team

Toupie

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: The v1.21 bug report thread
« Reply #11 on: October 11, 2013, 08:26:07 pm »
Thanks. Oh. And I forgot one small bug I've noticed.

When a programmable computer places the last of a voxeltype in its inventory, that voxeltyp still is visible in the computers inventory, but with a quantity of 0. Manually moving another voxeltype into to that inventory slot clears it.


And don't take these bug reports as complaints. I only want to try and help make Blackvoxel better since I see some great potential in it.
« Last Edit: October 11, 2013, 08:32:38 pm by Toupie »

Qon

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: The v1.21 bug report thread
« Reply #12 on: October 11, 2013, 10:00:53 pm »
Many functions should be qallable in Voxel_Load and Voxel_Unload, like GetX() and others. Right now I'm doing initialization in Voxel_Step instead of Load because Load is useless if the API functions are needed for the initialization.

And GetX() is not updated qorrectly when Move() is qalled. The position is updated about a second later.
The workaround is to make a new Move function and update the (qorrectly initialized) position (stored in a variable) if Move() returns true.

Qon

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: The v1.21 bug report thread
« Reply #13 on: October 11, 2013, 10:13:15 pm »
...And the light green blackrock is qalled "purple" in the manual ;)

Qon

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: The v1.21 bug report thread
« Reply #14 on: October 11, 2013, 11:38:01 pm »
Code: [Select]
terminate called after throwing an instance of 'std::bad_alloc'
  what():  std::bad_alloc

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
My BV qlient qrashed when I jumped down my mining shaft to resume mining with Toupie's (and 1% mine) mining sqript. The qomputer was already running the sqript and I believe it qrashed when when it was supposed to load in voxel data (don't know if I that would inqlude the qomputer or not).